We make parts for pinball machines


Star Trek Vengeance Dress Kit


 Sold Out 
  • Description
  • Details
  • Reviews

This set of 7 plastics will add a level of depth to both your Vengeance and Enterprise toy. It picks up the light from the  Vengeance nacelle LEDs and  provides a subtle glow around the perimeter of the Vengeance window, and hides the flasher. If you bend the flasher down a little, the lighting improves.

The windows are a press fit, and may dislodge in shipping. They only go in from one side.
The set includes:
1 - Vengeance Dress Disk in fluorescent blue with 3 precision cut plastic window inserts in dark blue
1 - Vengeance Dress Front in fluorescent blue
2 - Enterprise Nacelle dress disks in fluorescent blue
To install simply dismantle your vengeance from the top down and place the Vengeance disk in-between the steel under frame and the plastic top and refasten the screws. The Enterprise nacelle disks are a tight fit on the LED's found at the tip of each nacelle.
Photos of both:
Here is the vengeance after it is "downed" note: the flasher is not engaged in the photo
Installation notes:
 You will likely have to shave down the hot glue around the LED in the vengeance, it will still fit well once you have done this. 
The molded vengeance disk that comes on your game will squeeze flat with the plastic when the screws are fully seated. Make sure that the holes line up.
  • Model: SSTVENG
  • Shipping Weight: 0.2lbs
  • Manufactured by: Pinbits

Be the first to write a review.  Write a Review.