If you have an LotR LE, and a spare shaker motor but no board, this kit of parts lets you hook up a shaker motor. This is for experimenters only, and you do this at your own risk. Installation is reversible. This approach will not work without the LE software (10.02) and PAL installed.
Kit includes:
Backbox wire - insert into IDC connector if not installed.
Diode - rectifier diode for AC power
Connector - 5-pin connector to couple to motor
Connector - single pin in case you already have the backbox wiring
Fuse holder - wire-in fuse holder to protect your endeavours
Spade terminals - small spades to make an interposer (2 sets, just in case)
Heat shrink - to cover soldered ends of diode leads and connector pins.
(1/8" - 4"; 1/4": 2")
Fuse
As noted, for experimenters only. Here's a pictorial showing some of the key elements.
